Fabricated Metals' Instrument Houses are all welded construction and can be manufactured from aluminum; hot rolled steel, galvanized steel, stainless steel or Cor-Ten® steel. Walls are constructed of interlocking modular sections with all seams sealed. Inside walls have vertical channels with keyholes for mounting shelves, mounting boards, wire chases, and tag boards. Standard house height measures 99" from base to roof line unless otherwise specified. Base and frame are constructed of heavy angle. Angle size, stiffeners and structural members vary depending on size of instrument house. House doors are provided with a three-point latching system, facilities for locking with a signal screw padlock, screened louvers for ventilation, winter close-off plate, grease able hinges, and a mechanism to hold door open at 90 degree and/or approximately 170 degree position(s).

Fabricated Metals' instrument houses can be furnished in a variety of sizes and door arrangements. Interiors will be finished to your specifications.
Available options include;
Insulation 1", 2" or greater
Circuit breaker boxes-bolt in or plug on
Heaters-1500w, 2000w, or 4000w ac, 1500w 600v dc
Air conditioners 1 ton - 5 ton
Vent fans
Floor vents
Backboards/wall boards
Relay racks
Communication racks
Battery trays
Lighting can be incandescent or fluorescent
Ground systems
Fire and intrusion systems
Exteriors can be finished with specific custom paint, powder coating or custom facing.

Our goal is to meet or exceed our customers expectations.

Sub-Products

Instrument House details